JUKI IP-420, Инструкция по эксплуатации, Страница: 63 / 139

– 59 –
2
Input the breakpoint in the ordinary sewing.
For the ordnary sewng, the pont to be nputted s determned
accordng to the knd of element mmedately before the pont
where DECIDING POINT button
B
s pressed.
Select ORDINARY SEWING (functon 022) , and
nput ponts
1
,
2
,
5
and
7
wth DECIDING POINT button
B
and ponts
3
,
4
and
6
wth PASSING POINT button
A
n the cordnate nput screen.
In ths case, pont
2
becomes the normal decdng pont
(number of shape ponts + 1) snce the pont that s one before
pont
2
s the lnear sewng, and pont
5
and pont
7
become
the breakponts (number of shape ponts + 2) snce the pont
before the ponts
5
and
7
s the splne sewng.
3
Perform modification of the shape point with the
breakpoint.
It is necessary to be careful when performing the modification
of the shape pont ( "5-8. Shape point modification" p. 75 )
snce the breakpont s the pont where the shape pont s
overlapped twce.
Select SHAPE POINT MOVE (function code 136)
, and select the shape pont to be moved. Press FEED
FORWARD button
D
and advance the shape pont to
be selected. Then you will find that there are two points of the
shape pont at the breakpont (pont
R
).
7
1
6
5
4
2
3
4
5
D
1
3
B
A
2
R
3
2
6
4
1
5
7