JUKI IP-420 Скачать руководство пользователя страница 69

Страница: 69 / 139

– 65 –

(3) Point adding (076)

The point is added after the specified needle entry point. The

pattern data after the added pont does not move. Pont addng can
be added to not only the pattern data created wth the nput of pont
sewng, but also the data nputted wth any functon such as lnear
sewng or the lke.

Select the absolute point adding.

Select and execute ABSOLUTE POINT ADDING (functon
code 076)

n the code lst screen.

Specify the absolute point adding position.

Specfy the addng poston of the pont usng MOVE key

, and press ENTER button

Absolute point adding

Confirm the absolute point adding.

The point change confirmation screen shows that the point

change may be changed to the pont sewng. In case of
contnung, press ENTER button

, and the pont move

s executed. Then the screen returns to the standard screen.

Adding

Needle position

Содержание IP-420












































































































































Результаты поиска

Содержание IP-420

Отзывы:

JUKI IP-420, Инструкция по эксплуатации, Страница: 69 / 139

Результаты поиска

Содержание IP-420

Отзывы: