JUKI DP-2100, Инструкция по эксплуатации

Страница: 147 / 187

−
141
−
The same information as that in the normal
maintenance and inspection information screen is
displayed in the maintenance and inspection
information screen.
When button
3
of the item you desire to change
the inspection time is pressed, the inspection time
input screen is displayed.
3
When the designated inspection time is reached, the
warning screen is displayed.
In case of clearing the inspection time, press CLEAR
button
2
. The inspection time is cleared and
the pop-up is closed. In case of not clearing the
inspection time, press CANCEL button
1
and
close the pop-up. Every time one sewing is completed,
the warning screen is displayed until the inspection
time is cleared.
Warning Nos. of the respective items are as
follows.
• Needle replacement : A201
• Cleaning time
: A202
• Oil replacement time : A203
(Grease-up time)
4
2
5
1
3) Input the inspection time.
Input the inspection time.
When the inspection time is set to "0", the warning
function stops.
When clear button
4
is pressed, the value
returns to the initial value.
The initial values of the inspection time of
respective items are as follows.
• Needle replacement : 0 (1,000 stitches)
• Cleaning time : 0 (hour)
• Oil replacement time : 1,028 (hour)
(Grease-up time)
* Grease-up time is the time that 30 days/month, 5
days/week and 8 hours/day are converted to 6
months.
When ENTER
5
button is pressed, the
inputted value is determined.
17-3 Releasing procedure of the warning
The calculating method is
× 5 days × 8 hours.
7 days
30 days × 6 months
（ ）