JUKI DP-2100, Инструкция по эксплуатации, Страница: 119 / 187

−
113
−
No. Item Setting range Edit unit
Initial display
Reverse stitching at the sewing start A/M changeover
function selection
Designation of sewing speed of reverse stitching at the
sewing start is selected.
: In accordance with the speed by manual
operation of pedal or the like
: In accordance with the speed set by
Reverse stitching speed
Stop function immediately after reverse stitching at the
sewing start selection
Function to make the sewing machine stop once when
reverse stitching at the sewing start is completed.
: Without function : With function
Condensation/EBT changeover speed
Initial speed at the time of start of EBT
(reverse stitching at the sewing end) is set.
Retry function selection
Function to make the sewing machine rotate again in the
normal direction with max. torque after rotating the machine
in the reverse direction once when the sewing machine is
locked is selected.
: Without retry function
: With retry function
– – –
– – –
0 to 250
– – –
– – –
– – –
10rpm
– – –
Speed by
manual
operation
Without
function
170rpm
Without retry
function
Sewing machine start-up curve selection
Start-up curve of the sewing machine is selected.
: Normal curve : More sharp curve
Presser position at the time of stop of the sewing
machine selection
Position of the presser foot when the sewing machine
temporarily stopped is selected.
: DOWN : UP
Size class setting
Initial value (size country class, gents'/
ladies' selection, and basic size) when
creating a new pattern is set.
/
Refer to " 14-5 Explanation of the size class".
Initial pitch setting
Initial value of pitch when creating a new
pattern is set.
Bottom feed amount compensation
value setting
Compensation value of set value and
actual value of bottom feed amount is set.
– – –
– – –
– – –
1.5 to 6.0
–1.0 to 1.0
– – –
– – –
– – –
0.1mm
0.1mm
Normal curve
DOWN
Japan
Gentlemen
No. 6
3%
2.0mm
0mm