– 28 –
4) Set the number of stitches where necessary. It is necessary to
set the number of stitches without exceptions in the case the
"manual" is selected.
* In the case the "manual" is selected, set the counter set value
on the counter setting screen.
* In the case the "auto" is selected, press
B
on the AW
setting screen.
Choose the remaining thread margin length from 0 to 3.5 m.
After the entry of bobbin-thread winding length, press
I
.
Press
J
to return to the data input screen.
<Remaining-thread allowance
length selection screen>
5) Press
L
. Wait until the ini-
tialization operation of the device is
completed.
6) Place the first bobbin in the bobbin
setting section. Then, press
O
. The bobbin is taken in the
device.
for the bobbin
setting procedure.)
<Data input screen>
<AW operation screen>
M
L
K
J
I
<Bobbin check screen>
O
7) Subsequently, place the second bobbin in the bobbin setting
section.
8) Press
O
in the similar manner.
9) Now, the device starts winding bobbin. Wait a moment until
the device completes winding of bobbin.
10) Press
K
to return to the data input screen. Press
M
to display the sewing screen. Once the sewing screen is
displayed, sewing can be started.
Содержание AW-3S
Страница 1: ...1 INSTRUCTION MANUAL AW 3S...
Страница 4: ...2 1 2 Configuration The illustration shows the AMS 221EN...
