JUKI AW-3S, Инструкция по эксплуатации

Страница: 15 / 47

– 13 –
3-6. To use the AW-3
When using the AW-3, the memory switch (level 2) " " (AW-3 enable/disable setting) must be set
to "enable".
No. Description Initial value
Enabled Disabled
Disabled (AW-3 is not installed)
Disabled (AW-3 is installed/with communication) *
Disabled (AW-3 is installed/no communication) *
* Select when the AW-3 is installed but not operated.
If the memory switch is set to "With communication", the version of AW-3 software can be
confirmed and rewritten.
When the memory switch is initialized, the AW-3 is disabled. Re-set the memory switch
" " to "enable".
[ How to change the memory switch (level 2) ]
(1) Displaying the memory switch data (level 2) list screen
<Mode changeover screen>
B
When switch is held pressed by approximately six seconds, A is displayed on the up-
per section of screen.
When A is pressed to display next page on the screen, memory switch (level 2) B is
displayed. When the button of B is pressed, the memory switch (level 2) list screen is dis-
played.
A
<Mode changeover screen>