– 86 –
No.
Item
Setting range
Edit unit
4530/6030
6060
Counter motion selection
---
---
Sewing counter
No. of pcs. counter Bobbin counter
Height of eight of presser at the time
of 2 step stroke
10 to 300
1
Buzzer sound can be prohibited.
---
---
Without buzzer sound Panel operating sound Panel operating sound + error
Number of stitches
of thread clamp release is set.
1 to 7
1
Clamping timing
of thread clamp can be delayed.
－
10 to 0
1
Thread clamp control can be prohibited.
---
---
Normal
Prohibited
Feed motion timing is selected.
Set the timing in “–” direction when stitch is not
stitch is not
well-tightened.
－
8 to 16
1
State of the presser after end of sewing is selected.
---
---
Presser
goes up
after moving
at start of
sewing.
Presser
goes up
immediately
after end of
sewing.
Presser goes
up by pedal
operation
after moving
at start of
sewing.
After the feeding frame
travels to the sewing
starting position, it goes
up when the FEEDING
FRAME switch is
pressed. Sewing starts
when the START
switch is pressed.
Presser lifting motion at the end of sewing can be set.
---
---
With presser up
Without presser up
Origin retrieval can be performed every time after end of
sewing (other than combination sewing)
---
---
Without origin retrieval
With origin retrieval
Origin retrieval in combination sewing can be set.
---
---
Without origin
retrieval
Every time 1
pattern is finished.
Every time 1 cycle is
finished.
State of presser when sewing machine stops by temporary
stop command can be selected.
---
---
Presser rise.
Presser rise with
presser switch.
* For the PAUSE command, select "UP."