– 30 –
For example, nput X scale rate.
Press
A
to dsplay the tem data nput screen.
3
Input the data.
Input the value you desre wth ten keys and + / – keys
F
.
4
Determine the data.
When ENTER button
G
s pressed, the data s deter-
mned.
* For the other item data, the data can be changed by the
same operation.
* X/Y scale rate or X/Y actual size value can be inputted in
one screen.
1. When turning oFF the power without pressing rEaDY key
, the set value of "Pat-
tern No.", "X enlargement/reduction ratio", "Y enlargement/reduction ratio", "Max. sewing
speed", "thread tension" or "Intermediate presser height" is not stored in memory.
2. When operation processing cannot be performed since the reduction ratio is excessively
small, E042 operation error is displayed.
3. When the scale rate is changed with increase/decrease of number of stitches (pitch is
fixed), mechanical control command inputted to the points other than the shape point is
deleted.
In case of change dsplay
H
, the change confirmation screen is
dsplayed at the tme of the change of pattern.
When ENTER button
I
s pressed, the nformaton on the
current pattern s nvaldated and the pattern No. s changed.
To store the changed pattern, refer to
register of users’ pattern” p.41
.
When X/Y enlargement/reducton rato, thread tenson, ntermed-
ate presser, addng/deletng of thread tenson command, or addng/
deletng of ncrease/decrease value of ntermedate presser of us-
ers’ pattern or meda pattern s performed, the pattern knd secton
becomes change dsplay
H
.
G
F
I
H