– 33 –
(2) Editing the intermediate presser height
Press STEP SEWING button
A
on the sewng screen to
dsplay the step sewng screen.
The sewng shape s dsplayed at the center of the screen. The
current pont, sewng start poston and sewng end poston
are respectvely represented by (pnk crcle), (blue dot) and
(pnk dot).
Press MODE SELECT button
B
to select the ntermed-
ate presser mode.
When ONE-STITCH BACKWARD button
C
or FOR-
WARD button
D
s pressed, the feed (current pont )
moves backward or forward by one sttch. When two or more
commands have been entered, the feed poston does not
change but the command dsplay
a
s moved forward and
backward. When you keep pressng the button
C
or
D
, the
movng speed ncreases.
Indcated value
J
s the absolute value (Intermedate presser
heght value + Intermedate presser heght ncreased/de-
creased value).
When you press COMMAND SEARCH FORWARD button
E
or BACKWARD button
F
, the feed travels
forward or backward from the current needle entry pont to
the needle entry point where the first the intermediate presser
command or tenson command s found.
To stop the feed, press button
C
,
D
,
E
,
F
,
G
or
H
.
When INTERMEDIATE PRESSER button
G
s pressed,
the ntermedate presser s rased or lowered. (Ths button s
not dsplayed when MEMORY swtch U03 s set at
.)
When PRESSER INITIAL POSITION button
H
s
pressed, the work clamp moves to ts orgn and the screen s
restored to the sewng screen.
When COMMAND DELETE button
I
s pressed, the
screen for deletng the command as shown n
a
s dsplayed.
When
J
s pressed, the ntermedate presser heght
ncrease/decrease nput screen s dsplayed. Input a desred
value on ths screen usng numerc keypad and +/- keys
K
.
When ENTER button
L
is pressed, the data is confirmed.
1. When checking the needle, or performing the feed forward
or backward, the machine fails to work unless the presser
is lowered. use the machine after lowering the presser.
2. When the intermediate presser rests at its lower position,
the movement of the intermediate presser and needle dif-
fer depending on the setting of MEMorY switch u103.
3. When increasing the height of intermediate presser
or making the needle size thicker, confirm the clear
-
ance between the wiper and the components. Wiper
cannot be used unless the clearance is secured. In
this case, turn oFF the wiper switch, or change the
set value of memory switch u105.
-3. MEMorY SWItcH Data LISt" p.85
the memory switch settings.
A
B
L
K
I
A
D
G
E
H
C
F
J