– 58 –
(2) creating procedure of the combination data
1
Display the data input screen.
Only n case of the data nput screen (pnk) t s possble to n-
put the combnaton data. In case of the sewng screen (green),
press READY swtch
to dsplay the data nput screen
(pnk).
Pattern No. has not been regstered n the ntal state, and the
first pattern selection button is displayed in the blank state.
2
Display the pattern No. selection screen.
When PATTERN SELECTION button
A
s pressed, the
pattern No. selecton screen s dsplayed.
3
Select the pattern No.
When UP/DOWN SCROLL button
B
s pressed,
pattern No. buttons
C
whch have been regstered are
changed over n order.
It s also possble to dsplay the pattern No. nput screen by
means of NUMBER INPUT button
D
and nput a pat-
tern No. drectly. The contents of pattern data are dsplayed n
the buttons. Here, press the pattern No. buttons you desre to
select.
4
Determine the pattern No.
When ENTER button
E
s pressed, the pattern No. se-
lection screen is closed and the selection is finished.
A
C
B
F
E
D
I
G
5
repeat steps
2
through
4
as many as the number of pat-
tern Nos. you desire to register.
When the first register is determined, the second pattern selec
-
ton button
F
s dsplayed.
Repeat steps
2
through
4
as many as the number of pattern
Nos. you desre to regster.
When UP or DOWN SCROLL button
G
s pressed,
the PATTERN NO. button can be selected. The selected PAT-
TERN NO. button s dsplayed n pnk
.
When the PATTERN NO. INSERT button
H
s pressed,
a step s nserted before the pattern No. beng selected (ds-
played n pnk). When PATTERN NO. button
I
beng ds-
played s pressed to select a dfferent pattern No., the pattern
No. s changed over.
If the programmed combnaton data extends over two or
more screens, the next screen can be dsplayed by means of
SCREEN SCROLL button
J
.
H
J