manualshive.com logo in svg

JUKI AMS-224EN/IP-420, Инструкция по эксплуатации, Страница: 21 / 120

Поделиться
Скачать
JUKI AMS-224EN/IP-420 Скачать руководство пользователя страница 21

– 7 –

5

) 

uSB port

■

 Inserting a device into the uSB port

■

 removing the compactFlash (tM)

)  Hold the panel by hand, open the cover, and 

press the meda 

2

 removng lever 

1

. The 

meda s eject.

When the lever 

1

 is strongly pressed, 

the media 

2

 may be broken by pro-

truding and falling.

2)  When the meda 

2

 s drawn out as t s, re-

movng s completed.

1

2

■

 Disconnecting a device from the uSB port

Slde the top cover and nsert the USB devce nto 
the USB port. Then, copy data to be used from the 
USB devce onto the man body. 
After completon of copyng the data, remove the 
USB devce.

Remove the USB devce. Put the cover back n 
place.

  cautions when using the media 

•   Do not wet or touch it with wet hands. Fire or electric shock will be caused.   
•   Do not bend, or apply strong force or shock to it.
•   Never perform disassembling or remodeling of it.
•   Do not put the metal to the contact part of it. Data may be disappeared.
•   avoid storing or using it in the places below.
   

Place of high temperature or humidity / Place of dew condensation /

   

Place with much dust / Place where static electricity or electrical noise is likely to occur

to protect the uSB terminal, do not 
perform sewing by 10 times or more 
with the uSB thumb drive connected 
to the sewing machine. 

Содержание AMS-224EN/IP-420

























































































































Отзывы:

Нет отзывов