Judo 8210411, Инструкция по установке и эксплуатации

Страница: 16 / 48

16 JUDO BIOSTAT-COMBIMAT
Operation
5.4.3 Hygiene unit
In addition to its lime-protection function, the
water treatment device also combats bacte-
rial build-up which can lead to sickness such
as legionnaire’s disease. This is achieved by
means of the proven anodic oxidation
method.
The hygiene unit in the water treatment
device consists of an electrode specially
coated with a mixture of oxides of precious
metals as an additional anode and an elec-
tronic control unit. The stainless steel brush
is used here, too in the hygiene unit as a
deposition cathode in addition to its function
as a lime protection. The cathode brush is
freed of lime deposits from time to time by
means of a scraper, so that a pole reversal
of the electrodes is not necessary for
cleaning. Avoiding regular pole reversal
ensures the working life of the electrodes is
kept at maximum.
As soon as the water is flowing, a small
voltage is applied to the water itself thus
producing oxidants which combat bacteria
without the need for additional chemical
additives.
Although this treatment does create an envi-
ronment hostile to bacterial growth, it will not
provide complete protection in water with a
high bacterial content. Where this is the
case, additional disinfection measures
should be taken in accordance with regula-
tion s valid in the country of use in order to
ensure the water supplied is bacteria-free.
The disinfection used in this unit is not
intended as a full disinfection in the standard
sense, but as a prophylactic measure
designed to combat bacterial build up within
the unit itself.
5.5 Control lamps,
manual pushbuttons
Fig. 12: Control lamps, manual pushbuttons
LED 1 Operation/conditioning
Permanent green light: The water treat-
ment device is ready for use.
Green light flashing : The water treatment
is carried out.
LED 2 Cleaning/flushing
Permanent green light : A cleaning/flush-
ing cycle is carried out.
LED 3 Battery low
Red light flashing : The battery must be
changed otherwise no further cleaning /
flushing can be carried out.
LED 4 Fault
Red flashing light: The water treatment
device is not ready for use (see chapter
“Fault”).
Hand manual pushbutton
Triggers a cleaning/flushing cycle.
LED 1
LED 2
LED 3
LED 4
Hand
Operation/conditioning
Cleaning/flushing
Fault
Manual cleaning/flushing
Battery low