Warning message / fault
Display
Possible cause
Remedy
Alternating:
Leakage protect
closed
Leakage sensor
leakage warning
To open
press <OK>
The connected floor sensor
(accessory) has detected a
leak.
First check whether a
leak is present. If no leak
can be identified:
•
Acknowledge mes-
sage.
Alternating:
Leakage protect
closed
Small leakage
occurred
To acknowledge
press <OK>
During micro leakage test-
ing, a micro leak has been
detected.
Possible causes e.g.
•
Dripping water tap
•
Leaking filling valve of a
toilet cistern
•
Leaking water pipe
Acknowledge message.
If the cause cannot be
identified, but the mes-
sage is still regularly dis-
played: Call in a plumber
to investigate the cause
of the leak.
No water flow for
15 days
No water flow has occurred for
15 days (with setting vacation
mode
off
).
If message correct:
Press OK to delete the
display.
If message incorrect:
Arrange for a functional
test by the installer or
JUDO service.
Attention! Fault
........
The device has a technical
defect.
Inform the installer or
JUDO service.
Table 3: Help for warning / fault messages
1703593 • 2022/10
JUDO JPCS
27
