© 2017 JTECH Medical MN022_M
20
Wireless Dual Inclinometers
(9RF303, 9RF304)
Used to convey functional abilities concerning Range of Motion (ROM).
(9RF304)
(9RF303)
Incorrect motion
Correct motion
1 .
If using the alignment rails accessory, attach the alignment rail to the
inclinometer by setting the “Feet” of the inclinometer on top of one
alignment rail. Repeat for other inclinometer. To remove the alignment
rail, grasp the alignment rail and inclinometer in opposite hands and
pull to separate.
2 .
If using VELCRO® straps, attach the VELCRO® strap to the subject and
then attach the back of the inclinometer to the VELCRO® strap using a
slight twisting motion. To remove the inclinometer from the VELCRO®
strap, peel the inclinometer from the VELCRO® strap and then remove
the strap from the subject.
3 .
Push the “On” button on the inclinometer to enable communication
with the Commander Echo Console. If necessary, repeat this procedure
for the other inclinometer.
For instructions on operating the Commander Echo Console, please
refer to the Console Section of the manual.
For instructions on performing specific tests, please refer to the
optional Multimedia Help System CD.
For troubleshooting information, please see page 43
For technical specifications, please see page 52
Alignment Rails (8MH068) – The Alignment Rails
magnetically attach to the Inclinometers for easy visual
confirmation of alignment.
VELCRO® Straps (AA 026) – The VELCRO® straps can be used
for dynamic range of motion inclinometry testing. Comes in
a set with Small, Medium, and Large straps.
Accessories
Wrist Lanyard (7AC006) – The Wrist Lanyard is used to
help prevent dropping devices when carrying, or when
performing some tests.
