- 3 -
Field Configurators HARTConf, LHPConf for Transmitters with HART or LHP Communication and HART-USB Modem
1. General instructions and information
1.1 Symbols used
Symbol of warning; for safe use it is necessary
to proceed according to the instructions
Symbol CE certifies compliance of the product with
the respective government directives
This product does not belong to public waste and it is
subjected to separate collection
HART
®
Communication protocol for reading and changes
of configuration, registered trademark HART
Communication Foundation
LHP
Remote communication for reading and changing
of the configuration
1.2 Safety warnings and cautions
The instrument may be connected only to the
transmitters supplied from a safe source of voltage that
meets requirements of the standard EN 61010-1 and
that are installed in compliance with the national requirements
and safety standards. The instrument may be operated only
by a qualified person who has been familiar with this manual.
The instrument may not be used for other purposes than as
specified in this manual.
The maximum operational parameters of the instrument may
not be exceeded to prevent any risk of injury from electric shock.
Use the instrument in a suitable environment, without direct
sunlight, dust, high temperature, mechanical vibrations and
surges; protect it against rain and excessive moisture.
1.3 Scope of delivery
With
HARTConf
is delivered:
- Cabel HART and cabel USB,
- CD with driver,
- Accumulator NiMH 8,4 V / 200 mA h,
- Instruction manual.
With
LHPConf
is delivered:
- Cabel HART,
- Battery 9 V 6LR61 (6F22),
- Instruction manual.
1.4 Description of the delivery and packing
The product is packaged in a protective cover and provided
with an identification label with a mark of the output control.
The product must not be exposed to direct rain, vibrations and
shocks during transport.
1.5 Storage
The products shall be stored at temperatures from -20 °C to
+40 °C and maximum relative humidity 80 % in the rooms with
elimination of condensation of water vapours on the products.
The stored products shall not be exposed to any shocks,
vibrations and effects of harmful vapours and gases.
1.6 Installation and commissioning
During installation, commissioning, operation and maintenance
follow the instructions in chapter 4.
1.7 Spare parts
Any of the compact parts of the product can be also ordered
as a spare part if there are not required special procedures or
technological operations for the exchange.
1.8 Repairs
Products are repaired by the manufacturer. The products for
repair should be sent in a packing that guarantees damping
of shocks and vibrations and protects against damage during
transport.
1.9 Warranty
Products are covered by a warranty for a period of 3 years
from the delivery date on the delivery note. The manufacturer
guarantees technical and operational parameters of the
products within scope of the applicable documentation.
Warranty period is specified with individual items and begins
from the day of takeover of the goods by the purchaser or
delivery to the carrier. Any claims concerning to defects of the
goods together can be filed in writing with the manufacturer
within the warranty period and the claimed product shall be
presented. The claiming party shall give identification of the
product, number of the delivery note and description of the
fault or defect.
The manufacturer is not responsible for any defects caused
by improper storage, incorrect connection, damages caused
by external effects, in particular by effects of factors with
excessive values, unqualified installation, improper operation
or common wearing.
2. End of service and disposal
2.1 End of service
Dismounting and disposal of the device is possible after
disconnecting of a battery.
2.2 Disposal
When disposing the packing and destroyed or
irreparably damaged product proceed according to the
local regulations.
