JRC jue-87, Инструкция по эксплуатации, Страница: 81 / 230

3-21
3
NOTE
When saves the file at the 101th, the following window is displayed. In this case, delete the unnecessary
file until the file number is decreased less than 100, by
“delete file” command.
This window is continuously displayed until the file number is decreased less than 100.
Fig.3.7.1 “ERROR” Window
Step Operation IME/DTE Response Remarks
1
•
Move the cursor to “Edit”
and press
Enter
key.
•
The “Edit” window is
displayed.
2
•
Move the cursor to “edit
Telex file ” or “edit Ascii
file” and press
Enter
key.
The cursor blinks at “File” .
•
List of files stored in the
IME/DTE memory is
displayed.
3
•
Enter the file name to be
edited and press
Enter
key,
or move the cursor to the
file to be edited and press
Enter
key.
•
The message in the file
is displayed.
•
When you want to make a
new file, enter a file name
and press
Enter
key.
•
Note 2
•
When you want to edit a
file stored in USB drive,
input
E : into the
column of “File:”
(Note 3)
4
•
Edit the message using Edit
function keys (
F1-F10 ).
•
See “ 3.6.2 Editing
Procedure ” below.
5
•
After confirmation of
editing, press
F9
( “Save &
Quit” ) key.
•
Edited message is saved
in the IME/DTE
memory and the list of
file is displayed again.
•
When
F7
( “Quit” ) key is
pressed, the message is
abandoned without saving
in the USB drive.
6
•
To return to Main menu
screen, press
Esc
key.
•
Main menu screen is
displayed.
ERROR
Can not create new file.
It may be too many files on disk.
F10: Previous