
3-101
3
3.13.3.6 Position Updated
Renew the position information at fixed intervals with following below outlined procedures.
NOTE
Set the “Data source” to “Manual” prior to enter a position information manually.
The position information from GPS is ignored within 60 minutes after manual entering.
Set the “Data source” to “GPS” to make the position information from GPS effective.
Step Operation
IME/DTE
Response
1
•
Move the cursor to the
“Distress”
and press
Enter
key.
“Distress”
window is displayed.
2
•
Move the cursor to the
“Data source”
and
press
Enter
key.
The cursor is moved to right side.
3
•
Select the “Data source” and press
Enter
key.
GPS
: Ship’s position is set from GPS data
Manual
: Ship’s position is set to manual.
When the
“Gps”
is selected, the cursor is
moved to
“lEs”
.
When the
“Manual”
is selected, the cursor is
moved to
“Position”
.
4
•
Type the ship’s latitude and press
Enter
key.
•
Type the ship’s Longitude and press
Enter
key.
Ex. North:
35 50 20
East: 139 30 35
N
3
5
5
0
2
0
Enter
E
1
3
9
3
0
3
5
Enter
The cursor is moved to
“Course”
.
5
•
When the ship’s course is changed, press
Enter
key.
The cursor is moved to right side.
6
•
When the ship’s course is changed, press
Enter
key.
The cursor is moved to
“ship’s Speed”
.
7
•
When the ship’s Speed is changed, press
Enter
key.
The cursor is moved to right side.
8
•
Type the ship’s Speed and press
Enter
key.
The cursor is moved to
“lEs”
.
9
•
To return to Main menu, press
F10
(
“Previous”
) or press
Esc
key.
Main menu is displayed right side.
Note 1)
When the ship’s position has not been updated more than 4 hours, the
“Enter new ship’s
position”
message is displayed.
When the ship’s position has not been updated more than 8 hours from the displayed above
warning message, all geographical addresses and Safety NET message with priorities higher
than routine are received.
Note 2)
When any GPS equipment is connected with the JUE-87, ship’s position data is updated
automatically.
If GPS equipment is disconnected more than 3 minutes, it sounds and displays warning.
Содержание jue-87
