JRC jue-87 Скачать руководство пользователя страница 80

Страница: 80 / 230

3-20

3.6.5.5 Shortcut Character Color

This menu can set capital character shows shortcut command.

Step Operation

IME/DTE

Response

･

Move the cursor to

“Shortcut character

color”

with using the arrow keys and

press

Enter

key.

･

“Shortcut character color”

setting window

is displayed.

･

Select the color and press

Enter

key.

When the color is not changed , Press

F10

key.

･

Change the setting to new one.

3.7 Editing a Message

Before a calling, edit a message file by the editing menu. The editing command can be edited a

message file and managed a message file.

Fig.3.7 Example of “Edit” Window

3.7.1 File Editing Menu

(1) Edit a message file by the editing command.
(2) The editing command is composed of

“Edit Telex File”

menu and

“Edit Ascii File”

menu.

•

Edit Telex File

This command is used for the transmitting file by telex.
In this command, the characters that can use on the land telex line can be input. (Note 1)

•

Edit Ascii File

This command is used for the transmitting file by data line.
In this command, the characters that can use on the land data line can be input.

(3) The edited message file is stored in the IME/DTE memory. The capacity of the IME/DTE memory

is approx. 128M byte or 100 files maximum.

(4) When the USB drive is connected to the IME/DTE, the edited message file is saved in the USB

drive.

File editing menu

File management menu

USB drive management menu

edit Telex file
edit Ascii file

Delete file
reName file
Copy file

Remove USB drive
Format USB drive

Edit

Содержание jue-87







































































































































































































































Результаты поиска

Содержание jue-87

Отзывы:

JRC jue-87, Инструкция по эксплуатации, Страница: 80 / 230

Результаты поиска

Содержание jue-87

Отзывы: