JRC jue-87, Инструкция по эксплуатации, Страница: 65 / 230

3-5
3
3.4.1 Command
JUE-87 has two kinds of way to operate the IME/DTE, one is selecting command by cursor, and the
other one is pressing the buttons directory. Direct commands make quicker and easy operation when you
get used to the operation of IME/DTE.
NOTE
Selecting command by cursor, commands using
Alt .key is not available when another window is
displayed on main menu screen. Use them after closed window with F10 ("Previous")key.
(1) Commands selecting by cursor
You can select the function below in the Main menu by moving the cursor to the item you want
and pressing
Enter
key.
Transmit.................. To transmit messages.
read-Out.................. To read out received messages.
Edit ......................... To edit a message or to manipulate files.
call-Log .................. To display the history of both incoming and outgoing calls
Distress................... To initiate a distress alert.
Ncs/les-info ............ To display the lists of LES or NCS, or to register newly operating LES or
NCS in the list.
receive-Mode.......... To select receive mode, i.e. Inmarsat-C mode or EGC reception mode.
egC ......................... To select EGC service type.
(2) Direct commands
You can select each function in the Main menu screen directly by pressing one of the following
keys while holding down
Alt
key:
Alt
+
T
........ Transmit
Alt
+
O
........ read-Out
Alt
+
E
........ Edit
Alt
+
L
........ call-Log
Alt
+
D
........ Distress
Alt
+
N
........ Ncs/les-info
Alt
+
M
....... receive-Mode
Alt
+
C
........ egC
Alt
+
G
........ To go to “Status”, “set Up” and “diAgnostics”.
Alt
+
S
......... Status
To display MES status or test results
•
MES status (line status, bulletin board error rate, ID, MES serial number
and delivery date)
•
Tests results (ROM/RAM test, performance test)