JRC jue-87 Скачать руководство пользователя страница 14

Страница: 14 / 230

viii

DISTRESS ALERT TRANSMISSION PROCEDURES

•

DO NOT REQUEST THE DISTRESS ALERT EXCEPT IN AN EMERGENCY

•

The distress alert is routed to RCC (Rescue Coordination Center).

•

If the false distress request is transmitted, take the following instructions immediately.

(1) Stop the transmission power immediately.

(2) Report the following information to the Nearest Maritime Safety Office or Station or the

Operations Center, Administration Division, Guard & Rescue Department, Maritime Safety
Agency (TLX: +72-222-5193 JMSAHQ J, TEL: +81-3-3591-9000).

(a) Ship’s Name, Type and Flag

(b) Main ID Number

(d)

Cause of the false transmission

(e)

MES type, Serial Number and Delivery Date

•

Distress alert is retransmitted after the device is restarted, when momentary disconnection is occurred

in the device during the distress alert transmitting. However, please note that distress alert is not
retransmitted in the following cases.

(1)

When power switch of device is turned OFF/ON

(2)

When power switch of External power supply unit is turned OFF/ON

(3)

When the reset button of IME is turned ON

(4)

When the ship is recovered from blackout

(5)

When a random failure is occurred on device.

Step

DB* Operation

IME Response

Remarks

•

Open hinged cover and
press DISTRESS button till
the buzzer sounds.

•

IME displays

“SOS”

•

The buzzer starts sounding
0.5 sec ON
1.0 sec OFF.

•

If you do not want to
initiate a distress alert,
immediately release the
button within 4 sec.

•

Distress alert is transmitted
after continuously pressing
DISTRESS button for 4 sec
or more.

•

The buzzer sounds
continuously.

•

IME displays

“Distress

Alert Transmission”

•

When the JUE-87 is tuning
to LES channel, the

SYNC

LED blinks.

•

The distress message
registered in main unit is
transmitted.

* DB: Distress button

Note 1)

Please register the Distress message to the Distress window in main menu beforehand, prior to
transmitting the Distress Alert.

Note 2)

To stop Distress alert transmission, press X key or Y key while holding down Ctrl key.

Содержание jue-87







































































































































































































































Результаты поиска

Содержание jue-87

Отзывы:

JRC jue-87, Инструкция по эксплуатации, Страница: 14 / 230

Результаты поиска

Содержание jue-87

Отзывы: