JRC JMA-5206 Скачать руководство пользователя страница 192

Страница: 192 / 462

─

123

3.10.7 Set LORAN C (LORAN C Correction)

Note:

Plotter option is necessary to enable LORAN C time difference display.

Setting LORAN C

Procedures

1 Press [RADAR MENU] key twice.

Press [9] key.

Press [5] key.

The LORAN C Correction Menu will appear.

The chain and time difference for LORAN C
time difference display can be set by changing
the settings of the menu items.

[1] Chain

•

Set the chain.

•

Enter the value in the range 0000 to 9999 by using the numeric keys.

•

Only a value in the table can be entered.

[2] TD1, [3] TD2

•

Enter the TD value for slave station 1/2.

[4] TD1 Correction, [5] TD2 Correction

•

Enter the sound velocity time correction value for the TD value of slave station 1/2.

LORAN C Correction

1. Chain

9970

2. TD1

3. TD2

4. TD1 Correction

0.1 uS

5. TD2 Correction

0.2 uS

0. EXIT

Содержание JMA-5206















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5206

Отзывы:

JRC JMA-5206, Инструкция по эксплуатации, Страница: 192 / 462

Результаты поиска

Содержание JMA-5206

Отзывы: