JRC JMA-5206 Скачать руководство пользователя страница 176

Страница: 176 / 462

─

107

Depth Graph Setting

1. Depth Graph Display

OFF

2. Depth Range

50 m

3. Time Range

10 min

4. Depth Unit

METERS

0. EXIT

Displaying Water Depth Graph (Depth Graph Setting)

•

Displays a water depth graph using received water depth information.

Procedures

1 Press [RADAR MENU] key twice.

Press [4] key.

The Depth Graph Setting Menu will appear.

Detail information about screen display can be
set by changing the settings of the menu items.

[1] Depth Graph Display

•

Determine whether to display received water depth
information with a graph.

•

The graph is displayed in one of two ATA’s numeric data display areas.

•

When the water depth graph is displayed, the sizes of the ATA’s numeric data display areas are
exclusively decreased.

•

Depth Graph Display is set to ON/OFF each time the

button on the screen on page 2-7 is pressed.

OFF :

Does not display a water depth graph.

AREA1 : Displays the water depth graph in numeric data display area 1.
AREA2 : Displays the water depth graph in numeric data display area 2.

Содержание JMA-5206















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5206

Отзывы:

JRC JMA-5206, Инструкция по эксплуатации, Страница: 176 / 462

Результаты поиска

Содержание JMA-5206

Отзывы: