JRC JMA-5206 Скачать руководство пользователя страница 171

Страница: 171 / 462

─

102

3.10 APPLIED OPERATIONS

y y

RADAR Trails Setting

File LOAD >

File Save >

File Erase >

Trails Erase >

EXIT

[9] NEXT

•

The file menu will appear.

Load and save of the Rdar trails.

Procedures

1 Press [RADAR MENU] key twice.

Press [2] key.
Press [9] key.

[1] Loading Trails File

•

Presse [1] key.
The saved trail files are displayed.

•

Select the file to be loaded

Confirmation warining is displayed.
Select “Yes” for loading.

It takes a few second to be loded.

Note:

When the saved trail position is too far from own ship

position, the saved trails can not be loaded.
On the standby mode, however, far trail positions can
be loaded. In that case, the own ship position is

changed to the loaded trail position temporally.

After loading, Range scale, Trails mode
(True / Relative) and Max interval are set to loded
settings.

[2] Saving Trails File

•

Presse [2] key.
The File Save menu is displayed.

•

Using the cusor, enter the file name and click “ENT”

Confirmation warining is displayed.
Select “Yes” for saving.

It takes a few second to be loded.

Note:

When the own ship position data are not available,

trails can not be saved.

[3] Erasing Trails File

•

Presse [3] key.
The saved trail files are displayed.

•

Select the file to be erased.

Confirmation warining is displayed.
Select “Yes” for erasing.

Note:

Deleted files can not be restored, so Erase files carefully.

2 3 4 5 6 7 8 9

C D E F G H I J

M N O P Q R S T

W X Y Z

＜＞

DEL

ENT

Save

EXIT

Содержание JMA-5206















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5206

Отзывы:

JRC JMA-5206, Инструкция по эксплуатации, Страница: 171 / 462

Результаты поиска

Содержание JMA-5206

Отзывы: