JRC JMA-5206 Скачать руководство пользователя страница 170

Страница: 170 / 462

─

101

[5] Time/Cont Combine

•

This function superimpose-displays time radar trails and continuous radar trails.

•

Operators can distinguish time radar trails from continuous radar trails by setting different colors for
both types of trails.

OFF : Disables the Time/Cont Combine function.
ON : Enables the Time/Cont Combine function.

[6] Trails Process

•

Determine whether to use the video process with radar signals for plotting radar trails.

•

When Trails Process is ON , radar trails are never plotted with unwanted waves, but the radar trails
of fast moving targets may not be plotted.

•

When Trails Process is OFF , radar trails may be plotted with unwanted waves, but the radar trails of
fast moving targets are always plotted.

OFF : Disables the Trails Process function.
ON : Enables the Trails Process function.

[7] MAX Interval

•

Select the maximum time for displaying radar trails.

•

Select SHORT when short radar trails are often used in bays and the likes.

•

Select LONG when long radar trails are necessary for ocean navigation.

•

MEDIUM is for specification between SHORT and LONG .

•

Continuous trails are available with all the options.

SHORT :

Sets 15 minutes as the maximum time for radar trails display.

MEDIUM :

Sets 30 minutes as the maximum time for radar trails display.

LONG :

Sets 60 minutes as the maximum time for radar trails display.

SUPER LONG : Sets 12 hours as the maximum time for radar trails display.

Содержание JMA-5206















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5206

Отзывы:

JRC JMA-5206, Инструкция по эксплуатации, Страница: 170 / 462

Результаты поиска

Содержание JMA-5206

Отзывы: