JRC JMA-5206 Скачать руководство пользователя страница 166

Страница: 166 / 462

─

3.10

APPLIED OPERATIONS

3.10.1 Set Radar Signal Processing (Process Setting)

This function enables the setting of detail information about radar signal processing.

Procedures

1 Press [RADAR MENU] key twice.

Press [1] key.

The Process Setting Menu will appear.

Detail information about radar signal
processing can be set by changing the settings
of the menu items.

Note:

After the settings for radar signal processing are

changed, small targets may not be displayed or
unwanted waves may not be suppressed. Thus, do
not make a significant change in the settings.

[1] Video Latitude

•

Select the dynamic range in which receiving signals are to be shown on the radar display.

•

Select NORMAL in standard, and WIDE in rainy weather.

•

NARROW clearly displays short-range videos when STC is used in manual mode.

NORMAL : Standard setting

The dynamic range varies depending on the actual range:

Short range > long range

WIDE :

Use this mode when rainy weather intensifies unwanted waves.

The dynamic range is about twice as wide as when NORMAL is selected.

SUPER WIDE : Use this mode when rain cloud remain at WIDE mode.

The dynamic range is about twice as wide as when NORMAL is selected.

NARROW : Narrows the dynamic range at short range.

Process Setting

1. Video Latitude

NORMAL

2. Video Noise Rejection

LEVEL1

3. Auto DR Control

4. Process Switch

OFF

5. 2nd Process Mode

REMAIN

6. Process Switch Range

6.2nm

7. Fast Target Detection

OFF

8. User Function Setting

0. EXIT

Содержание JMA-5206















































































































































































































































































































































































































































































Результаты поиска

Содержание JMA-5206

Отзывы:

JRC JMA-5206, Инструкция по эксплуатации, Страница: 166 / 462

Результаты поиска

Содержание JMA-5206

Отзывы: