JRC JFS-280, Инструкция по эксплуатации

Страница: 77 / 328

3-15 3 Operating procedures
3
Selecting Items 3.2.3
You can use the number keys, arrow keys, MULTI knob , or cursor (trackball) to select items.
Selecting items with the MULTI knob
(1) Press the [MENU] key and, while the menu is displayed, rotate the MULTI knob to
highlight and move through the items. Select the item you want, and press the
[MULTI] knob to set the item.
Turn it to the right to move upward. The selection cycles to the top and then back to
the bottom.
Turn it to the left to move downward. The selection cycles to the bottom and then
back to the top.
The following is an example of the first menu screen when the [MENU] key is
pressed.
You can add from 1 to 6 menus with the
user settings.
(2) To select a value or item from a pull down list, use the same procedure as in step (1)
to select it and set it.
(3)
If you press the [CNCL] key in step (2), the selection is cancelled and changes to the
previously selected item.
(4) Press the [ENT] key or the [MULTI] knob to set the selected value.
(5) The set value is reflected on the screen while the selection is selected, depending on
the menu item.
(6) To change an item that you just set, press the [MULTI] knob, while it is still selected,
and make a selection to open the [ENT] menu.
←Highlighted item
Top level of a menu