JRC JFS-280, Инструкция по эксплуатации

Страница: 105 / 328

4-15 4 Operations
4
4.2 Split Display
By pressing the [MODE] key, you can display the fish finder images and the sound detection images on
the screen.
The sound detection display and fish finder display are disabled in the initial settings. To enable them,
do the settings for each one.
You also need to connect the signal from the fish finder to display the fish finder images.
After connecting it, you need to set the connection in "INITIAL" in the "MENU". Contact your
retailer or a service representative to do the settings.
4.2.1 Sound Detection Display
Operating Procedure Press the keys "8
→
2
→
3
→
1" to go to AUDIO settings
Press the [MENU] key. The menu opens.
Turn the [MULTI] knob to move to "8. OPERATION" and
press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to "2. DISPLAY MODE"
and press the [MULTI] knob to open the submenu. Turn
the [MULTI] knob to move to "3. SPLIT DISPLAY" and
press the [MULTI] knob to open the submenu.
Turn the [MULTI] knob to move to "1. AUDIO" and press
the [MULTI] knob to display the pulldown menu.
The initial setting is "OFF".
Turn the [MULTI] knob to move to "2. ON" and press the
[MULTI] knob to select.
• The display of fish finder images are not guaranteed for all commercially available fish finders.
• Some fish finders cannot be connected due to their construction or specifications.
• If you want to connect a fish finder, contact your retailer or a service representative.
Precautions