JRC JFS-280, Инструкция по эксплуатации

Страница: 165 / 328

6-17 6 Operation Settings
6
Operating Procedure Press the keys "8 → 1 → 5 → 3" to go to DELETE settings
Open the submenu for "5. SETTING CARD", the same
as in the previous section.
Turn the [MULTI] knob to select "3. SETTING DEL
FILE". Press the [MULTI] knob to open the submenu.
The diagram on the left is an example of an open
submenu.
Confirm the data in here that is no longer needed, and
then turn the [MULTI] knob to selected it.
As an example this time, delete the file named
"1.000000-0136.csv".
Turn the [MULTI] knob to select 1. Press the [MULTI]
knob to open the pulldown menu.
Select "2. DELETE" with the [MULTI] knob. Press the
[MULTI] knob to set it.
When deletion is complete, the menu closes and the
"Delete" selection screen opens.
As shown in the example diagram on the left, you can
see that the file has been deleted.
Press the [MENU] key to close all the menus and
finish.
6.1.5.4 Formatting Cards
You can use the card format function to easily delete data if you are deleting all the data from
an existing card or if you are starting to use a new compact flash card.
Precaution: All the data in the card is lost when the card is formatted.
Operating Procedure Press the keys "8 → 1 → 5 → 4" to go to CARD
FORMAT settings
Open the submenu for "5. SETTING CARD", the same
as in the previous section.
Turn the [MULTI] knob to select "4. CARD FORMAT".
Press the [MULTI] knob to open the submenu.
The "4. FORMAT" submenu opens. Turn the [MULTI]
knob to select "2. OK.
If there are no problems with the card to format, press
the [MULTI] knob to start formatting.