JRC JFS-280, Инструкция по эксплуатации

Страница: 241 / 328

7-7 7 Other Items
7
White frame
Change the
range value
Move cursor and press
[ENT] key to finish
Range selection
Press the [MULTI] knob to move the white frame to the
location that you want to set.
How to change a registered sonar range
1) Turn the [MULTI] knob to move to Pattern (1 through
4 of the registered ranges). Turn the [MULTI] knob to
select a pattern from 1 through 4. Example: Select "1".
2) Select the range (1 through 16) that you want to
change.
Turn the [MULTI] knob to move to the frame for Level.
Turn the [MULTI] knob to select the range you want
from 1 through 16. Example: "10"
3) Turn the [MULTI] knob to move to Range. Because
level "10" is already selected, move to range "10". Turn
the [MULTI] knob to adjust the value for the range that
you want to set. Example: "550"
4) Repeat steps 2) to 3) to change other ranges.
5) When you have completed the changes, move the
cursor to the "SET" position. Press the [ENT] key to
accept.
Close the "SONAR" menu.
6) If you complete mid-way without making changes, move the cursor to "CNCL". Press the
[ENT] key to finish.