Joyner TROOPER T2, Руководство пользователя

Страница: 84 / 205

84
suddenly, while taking off the open pins.
4.2.5. Removal of the oil pump pressure relief
valve spring stand, spiral spring, oil pump
pressure relief valve
4.2.6. Removal of the front oil seal of the
crankshaft
Attention
The removed oil seals are not
reusable.
4.3. Routine checks
4.3.1. Checks on lubricating oil pump spacing
4.3.1.1.
Follow the mark on the interior and
exterior gears of the oil pump to place it
into the lubricating oil pump body on the
cylinder body.
4.3.1.2. Use a feeler to measure the
clearance between the interior gear and
the exterior gear
[Benchmark]
0.05-0.18mm(average of 9 points)
[Limit]
0.35 mm
4.3.1.3. Use a feeler to measure the clearance
between the rotator and the pump body
[Benchmark]
0.10-0.181mm
[Limit]
0.25mm
4.3.2. Routine checks on the pressure relief
valve
4.3.2.1. Remove the pressure relief valve, there
MARK