Joyner TROOPER T2, Руководство пользователя

Страница: 35 / 205

35
2.
Push the latch plates into the buckle , use a
hook connects the end of the belt which crosses
left leg and set level. Pull up on the latch plates
to make sure it is secure (see right picture).
3. Position the shoulder belt over your shoulder
and the leg belt over your leg. The shoulder belt
should fit against your shoulder and the leg belt
should fit against your leg. If it is loose, pull the
belt out all the way and then let it retract.
4. To release the buckle, lift and release the hook.
z Before attempting to adjust the seat ensure that engine of TROOPER is stopped.
z Never operate TROOPER when the seat is not securely fastened, or may result in a strong
possibility of severe personal injury or loss of life. Before attempting to adjust the seat
ensure that TROOPER is stopped.
Safari bed
Safari bed can be lift up.
1. Pull up the release lever on the both side of
the vehicle,
2. Lift up the safari bed slowly until it stops.
3. Lower the safari bed slowly to its original
position and make sure it is locked tightly.
z Before closing the bed, be sure others are standing away from the vehicle. Keep hands
and fingers away from the pinch points between the bed and frame.
z The max load is 150Kg/330Ib.never exceed the stated maximum load limit for this safari
bed. or injury or
z Cargo should be properly distributed and securely attached. Reduce speed when carrying
cargo. Allow greater distance for braking.
Cross above right leg
Cross above
right shoulder
hook
Cross above
left shoulder