Joyner TROOPER T2, Руководство пользователя

Страница: 60 / 205

60
2.7.
Remove the crankshaft timing gear
2.8.
Make careful and detailed checks on the timing belt. Replace with new parts if any of the
conditions shown in the figure occurs.
2.8.1. Cracks on the backside rubber;
2.8.2. Cracks of teeth roots, cracks clearing off the fabric lining layer;
2.8.3. Tears and wears of fabric lining layer, missing rear teeth, broken teeth, etc.
2.8.4. Abnormal tears and wears on belt sides
2.8.5. Even if the damages on the outer appearance can not be confirmed, the belt should be
replaced under any of the following circumstances:
2.8.5.1. If the water in the water pump is leaked, which makes it necessary to refill the water
continuously;
2.8.5.2. There are much oil stains on the belt, the belt should be replaced for the rubber will be
damaged when it is expanded;
Specifications and model of the timing belt
Part number 372-1007030
Belt wide ２７．０ mm
Timing belt tensioner
Turn the belt tensioner supporting stand bolts to see if there is any abnormal sound. Check to
see if there are any damages on the contacting surface of the belt.
Specifications and model of the timing belt tensioner
Part number 372-1007030
Wide
２７．０
mm
Outside diameter φ 50mm
Check to see if there are any damages on the outer appearance
Chap
Chap
Tears and wears
Abnormal Tears and wears
MIS
Drop-off of belt core