Joyner TROOPER T2, Руководство пользователя

Страница: 76 / 205

76
3.3.3.2. Use special tools to drive in the
valve-guiding pipe to the position as
shown in the right figure from the side of
the combustion chamber.
Attention
The removed guiding pipe cannot be
used repeatedly. The air intake and exhaust
valve guiding pipes should not be mixed up in
installation.
3.3.3.3. Use special tools to drive in the new
valve-guiding pipe to the position as
shown in the right figure.
Attention
In the process of driving in the guiding
pipe into the cylinder cover, the operation should
be carried out slowly until the pipe gets to the
proper position. No excessive driving should be
exerted. Pay attention to the specifications in the
operation. Driving in depth of throttle guiding
pipe
3.3.3.4. Use reamer to grind the inner diameter
to achieve the standard value of the
clearing.
3.3.4. Valve mating surface
3.3.4.1. Smear thin layer of red lead powder on
the valve-mating surface. Do not turn the
valve, and gently drive it in. Check the
mating condition and the width of mating
line.
3.3.4.2. Correction of valve base stand ring
Attention
Signs of breaking or cracking should
not appear on the correction surface. Take it out
slowly after the correction is completed.
3.3.4.3. Use a 45 degree cone as the mating
model EF
item GL,ZL,RL,GS,ZS
Height(mm)
IN 13.71
±
0.25
EX 12.11
±
0.25
For IN For EX