12
ENGLISH
7�3 OPERATING PARAMETERS
The stove’s operation depends on user-defined parameters
of Power, Ventilation and Temperature.
7�3�1 Power change
Power corresponds to the amount of heat generated
by the stove and hence has a direct influence on fuel
consumption.
To change the power:
a) Using the arrow keys select the Power menu and
press .
b) The power parameter will start to flash; change it by means
of the keys (
1
is the minimum,
5
is the maximum).
c) Press button , to confirm the setting.
7�3�2 Ventilation change
To change the ventilation value:
a) Using the arrow keys select the Ventilation menu
and press .
b) The ventilation value will start to flash, change the value
using the keys:
•
“OFF”
= the fan is completely shut off, and the stove works
only with natural convection; (only in certain models);
•
“1”
is the minimum and
“5”
is the maximum;
•
“Auto”
= automatic work (the stove sets fan revolutions and
stove power independently depending on the temperature in
the room);
•
“Hi”
= very fast operation (use only when it is necessary to
heat the room quickly).
c) Press button , to confirm the selected data.
Operation of convection ventilation:
at power 1: possible selection of natural convection (OFF);
at power 2: possible selection of natural convection (OFF);
at power 3: possible selection of natural convection (OFF);
at power 4: selection of natural convection impossible:
minimum speed V = 1;
at power 5: selection of natural convection impossible:
minimum speed V = 2
7�3�3 Change of ambient temperature
A change of this parameter defines the desired room
temperature, which will be read directly by the sensor in-
stalled on the stove.
To change the desired temperature value:
a) Using keys , select the Temperature menu and
press .
b) The current value will start to flash, and it can be changed
using the keys.
c) Press the key to confirm the adjustment.
8 PRELIMINARY ACTIVITIES
8�1 FILLING WITH PELLET
The first activity to be performed before firing up the
stove is to fill the pellet container.
Pellet should be put in the container using a small shovel.
Do not empty the bag directly into the container in order
to avoid dumping of sawdust or foreign bodies that may
disrupt the stove’s normal operation, and do not spill
pellet outside of the container.
After loading pellet, it is necessary to close the container’s
cover�
In the case where the “autonomy” function is enabled,
select the fuel icon
by means of the arrow keys and
, then press the “send” button . Next, using keys
select the “FULL” option and press the “send”
button .
To disable the autonomy function, select “OFF” instead
of “FULL”.
8�2 ELECTRICAL POWER SUPPLY
Connect the stove to the electrical grid by setting the
ignition switch in the rear part of the stove to “I” (fig. 8.2).
Switch-on of power is signalled by a series of interrupted
sound signals and lighting up of the screen.
In the case where a long period of idleness is planned, it
is recommended to set the switch at the back of the stove
to the OFF position (O)�
When connecting the stove to an electrical socket, re-
member not to touch the control panel�
8�3 PRELIMINARY SETTINGS
Before using the stove, the current language, date and
time must be set.
8�3�1 Setting the date and time
To change the date:
a) Using the arrow keys select the Configuration menu
and press .
b) Select the
“7”
item using button and confirm by pressing
button .
c) Using button , select submenu
[3]
and confirm using the
button.
d) The time parameter will start flashing, change it using the
keys, then press button
e) The minutes parameter will start flashing, change it using the
keys, then press button .
f) The day parameter will start flashing, change it using the
keys, then press button .
g) The month parameter will start flashing, change it using the
keys, then press button .
h) The year parameter will start flashing, change it using the
keys, then press button .
i) The current day of the week parameter (Monday =
1
,
etc., Sunday =
7
) will start flashing, change it using the
keys.
j) Press button , to confirm the setting.
8�3�2 Setting screen brightness
Screen brightness can be adjusted when the screen is in
standby mode.
a) Using keys , select the Configuration menu and
press .
b) Select the
”7”
item using button and confirm by pressing
button .
c) Using button , select submenu
[11]
and confirm using the
button .
d) Set the desired brightness (
OFF
, from
1
to
5
) using buttons
and , then confirm using button .
fig� 8�2
