JOSAM homebase 4 Скачать руководство пользователя страница 133

Страница: 133 / 140

i-track II

Maintenance: Measuring head

133

Calibration

To ensure that the system keeps the accuracy within limits, the measuring heads must be regularly

calibrated.

Tools needed:

- locking excenter JT31117

WARNING

It is imperative that all calibration is performed with the highest precision. Mistakes in the

calibration procedure will result in incorrect measuring values.

To enter the calibration mode click on

[Setup]

Measuring unit compare

Always compare the measuring units before calibration.

Click on

[Compare units]

1. Mount wheel adapter on the left side of a non-steering axle. Distance to scale preferably 3 meters

in both directions.

2. Make sure that the axle is NOT jacked up.

Unit 1

Mount the first measuring head in the inner groove of the wheel adapter axle.

4. Centre the spirit level on top of the measuring unit.

5. Press

on the measuring unit.

The results for the first unit are displayed.

Содержание homebase 4













































































































































Результаты поиска

Содержание homebase 4

Отзывы:

Бренды по названию

Популярные бренды

JOSAM homebase 4, Руководство оператора

Результаты поиска

Содержание homebase 4

Отзывы:

Бренды по названию

Популярные бренды