Jonix minimate plus, Руководство по эксплуатации и обслуживанию

Страница: 18 / 76

18 - 76
minimate plus
• The device must be installed in strict accordance with the instructions contained in this
manual.
• While performing installation, operate in full safety and in a clean environment clear of
obstructions.
• Before switching the device on check the integrity of the various components and of the
electrical mains to which it is connected, making sure that it is fitted with a circuit breaker
upstream of the power line.
• Before putting the device into operation, check that the electrical system to which it is to
be connected has an effective earthing system.
• Do not service or clean the device without first unplugging it from the mains.
• Perform routine maintenance following the instructions in this manual or contact
JO NIX
S.p.A. for assistance.
• Unscheduled maintenance and the replacement of damaged or worn parts must only be
carried out by specialist personnel authorised by
JO NIX S.p.A.
.
• Spare parts must meet the requirements defined by
JO NIX S.p.A.
.
• Do not insert objects of any kind into the device, as coming into contact with live parts or
electrical terminals may cause fires or electric shocks. In case of maintenance, check that you
have removed all tools and objects before closing the panels and restarting the device.
• Comply with the laws in force in the country in which the device is installed, regarding the use
and disposal of the packaging and products used for cleaning and servicing the device; you
should also observe the recommendations given by the manufacturers of such products.
• In the event of decommissioning or disposing of the MIC device, follow the anti-pollution
regulations set out by the country in which the device is installed.
• Use only the power supply indicated on the nameplate. If you are not sure about the type of
power supply available, ask your local retailer or electricity provider for assistance.
• Do not spill water or other liquids on the device.
• Place the device so that the power cable cannot be stepped on and/or does not cause tripping.
• Do not touch the inside of the device, unless otherwise specified in the instructions contained
in this manual.
• Never force the components when installing or performing maintenance operations: although
it is built with high strength materials, the parts of the device can be damaged if handled
incorrectly.
6.1 SAFETY INSTRUCTIONS
JO NIX S.p.A.
disclaims any liability for failure to comply with the safety and
prevention standards as described below.
The Manufacturer also disclaims any liability for damage caused by improper use
of devices and/or alterations carried out without prior authorisation.
6 - INSTALLATION AND COMMISSIONING