Jonix minimate plus, Руководство по эксплуатации и обслуживанию

Страница: 64 / 76

64 - 76
minimate plus
54
56
55
2
1
3
4
Fig. 54: Gently unscrew the ionising pipe,
gripping it at the base (green part).
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not
in contact with the surface of the tube.
Fig. 55: Gently screw in the new ionising
pipe, holding on to the base (green part).
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not
in contact with the surface of the tube.
Check that the earthing
spring is in contact with the
outer mesh once the ionising
tube have been screwed back
into place. Otherwise contact
the manufacturer.
ATTENTION: do not
overtighten the screw after
reaching its end stop.
Fig. 56: Put back the upper filter,
making sure the gasket in
tire is facing down.