Jonix minimate plus, Руководство по эксплуатации и обслуживанию

Страница: 67 / 76

67 - 76
minimate plus
62
63
64
Fig. 62: Remove the panel that protects
the fan by unscrewing the retaining screws
Check that the earthing
spring is in contact with
the outer mesh once the
ionising tubes have been
screwed back into place.
Otherwise contact the
manufacturer.
ATTENTION: do not
overtighten the screw after
reaching its end stop.
Fig. 63: Gently unscrew the ionising pipe,
gripping it at the base (green part).
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not
in contact with the surface of the tube.
Fig. 64: Gently screw in the new ionising
pipe, holding on to the base (green part).
If the operation is difficult to perform, pull
slightly the earthing spring so that it is not
in contact with the surface of the tube.