22/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
we know what‘s cooking
Filling the kettle with water
CAUTION!
Use caution, the water can be hot and pose a risk of burns.
The water filling function is adjusted using the part of the panel shown in the following illustration.
Fig. 0-16 Filling the kettle with water, AutoTemp 32, 36 and 56
1
Key for manual water filling
2
Key for automatic water filling
3
Display for water quantity or time
4
LED for water on
5
Key for water on / off
Automatic water filling
This function enables a particular quantity of water to be added to the kettle.
The function depends on whether the kettle is fitted with a water flow meter.
Automatic water filling with a water flow meter
With this method, a water flow meter is fitted to the kettle, so that the controller accurately measures how
much water is added to the kettle
Automatic water filling without a water flow meter
In this case, the method is selected in the user menu:
•
Estimated water quantity.
much water that flows into the kettle in one minute. Based on this value, the required number of litres
is converted to the number of minutes that the solenoid valve should remain open.The advantage of
this method is that the required quantity can be set without purchasing any additional equipment. The
disadvantage is that the measurement will be imprecise if the water pressure fluctuates.
•
Time-specific measurement (Default setting).
With this method, the user specifies how long time the solenoid valve should remain open. When this
time has elapsed the solenoid valve will be closed.The advantage of this method is that it is easy to
understand. The disadvantages are that the quantity will depend on the water pressure and that set-
ting the time correctly requires practice.
Operating the water flow meter and estimated water quantity
Press
so that the display flashes and set the required quantity using the arrow keys. The quantity is
set to one decimal with a maximum value equal to the volume of the kettle.
The large arrows change the set quantity by 10 litres and the small arrows change the quantity by 0.1
litres until the value has been changed by 1 litre, after which it will start to change by 1 litre at a time.
The function will be exited automatically after three seconds without a key press or if another function is
selected.
The display will now show the required quantity. If you want to adjust the required quantity you must
press
again.
