32/69
Docum
ent
1
0000
028
013
-DO
C
-00
0-0
0-EN
we know what‘s cooking
The user must set the relevant parameters to enable the kettle to execute a program. In this example,
the following parameters must be set:
•
When the process should start?
•
How much water should be added to the kettle?
•
What temperature should be set?
•
What speed and stirring pattern should be used?
•
Heating time at first given temperature
•
Heat temperature thereafter?
•
What speed and stirring pattern should be used thereafter?
A set of parameters is called a variant of the program and 10 variants can be saved for each program.
The same programs can therefore be executed with different sets of values. For example, variant num-
ber 1 could start at 05.00, add 50litres of water to the kettle and heat it to 90 ºC, for 12 minutes and there-
after at 80 ºC, while variant number 2 could start at 06.00, add 30litres of water to the kettle and heat it
to 50 ºC for 20 minutes and thereafter at 90 ºC.
Program 4 can be set up in the following table:
Example of setting up a program
If program 4 is to be setup, the procedure would be as follows:
Step Action
Parameter
Variant 1 Variant 2
1
Switch to heating mode
2
Pause until the required time
P02.1 Time
05.00
06.00
3
Add water in required quantity
P03.1 Water quantity
50
30
4
Set the set point for food temperature and
heating power
P04.1 Food temperature
P04.2 Heating power
90
9
50
1
5
Switch on heating
6
Set stirring pattern and stirring RPM.
Switch on the stirrer
P06.1 Stirring pattern
P06.2 Stirring rate
1
75
3
50
7
Pause for required time
P07.1 Time
12
20
8
Set the set point for food temperature and
heating power
P08.1 Food temperature
P08.2 Heating power
80
7
90
9
9
Adjust new stirring pattern and stirring RPM.
Switch on the stirrer
P09.1 Stirring pattern
P09.2 Stirring rate
30
2
20
3
Step Action
Parameter
1
Switch to heating mode
2
Pause until set time is reached
P02.1 Time
3
Add water in required quantity
P03.1 Water quantity
4
Set the set point for food temperature and heating
power
P04.1 Food temperature
P04.2 Heating power
5
Switch on heating
6
Set stirring pattern and stirring RPM
Switch on the stirrer
P06.1 Stirring pattern
P06.2 Stirring rate
If stirring pattern 0 is selected, this
step will be skipped.
7
Pause for required time
P07.1 Time
