Jolimark TP820, Руководство пользователя

Страница: 44 / 48

TP820 User’s Manual
- 41 -
Set the horizontal and vertical unit to 1/x inch and 1/y inch.
When x or y=0, the default horizontal or vertical unit is selected.
GS V
Select cut mode and cut paper
Format: ASCII: GS V m (n)
Decimal: 29 86 m (n)
Hex: 1D 56 m (n)
Description:
(There is only one cut mode can be selected if the cutter can only realize one cut type.)
m=0, 48; No n parameter, Executes a full cut.
m=1, 49; No n parameter, Executes a partial cut (with one point left in the middle).
m=6, n=0~255; Feed paper to n*(horizontal or vertical motion unit) and executes a full cut.
m=66, n=0~255; Feed paper to n*(horizontal or vertical motion unit) and executes a partial cut.
GS W
Set print area width
Format: ASCII: GS W nL nH
Decimal: 29 87 nL nH
Hex: 1D 57 nL nH
Description:
Set the print area width to (nL+nH*256)* (horizontal or vertical motion unit), nL, nH=0
～ 255.
Horizontal or vertical motion units are specified by GS P.
GS f Select the HRI character font
Format: ASCII: GS h
n
Decimal: 29 102 n
Hex: 1D 66 n
Description:
Select the HRI character when printing a bar code, using n as follows:
n=0, 48; Selects character A (12*24)
n=1, 49; Selects character B (8*16)
GS h Set bar code height
Format: ASCII: GS h
n
Decimal: 29 104 n
Hex: 1D 68 n
Description:
Set the height of the bar code to n dots.
n=0
～ 255.
GS k
Print bar code
Format: ASCII: GS k m d1..dk NUL
Decimal: 29 107 m d1..dk 0
Hex: 1D 6B m d1..dk 00
* ASCII: GS k m n d1..dn
Decimal: 29 107 m n d1..dn
Hex: 1D 6B m n d1..dn
*when m>64
m Bar code type Amount of data The range of k character Character code
0 UPC-A Fixed 11<=k<=12 0~9 48<=d<=57
1 UPC-E Fixed 11<=k<=12 0~9 48<=d<=57
2 EAN13 Fixed 12<=k<=13 0~9 48<=d<=57
3 EAN8 Fixed 7<=k<=8 0~9 48<=d<=57