Jolimark TP820, Руководство пользователя

Страница: 35 / 48

TP820 User’s Manual
- 32 -
n=1: Transmit print status
n=2: Transmit off-line status
n=3: Transmit error status
n=4: Transmit paper roll sensor status
*Note: Only valid in serial interface.
ESC BEL n1 n2
Beep for appointment
Format: ASCII: ESC BEL n1 n2 n3
Decimal: 27 7 n1 n2 n3
Hex: 1B 07 n1 n2 n3
Description:
N1 specifies the length of beeping time, n2 specifies the length of intermission time and n3 is the
beeping times. The unit of n1 and n2 is 100 milliseconds.
ESC SP Set right-side character spacing
Format: ASCII: ESC SP n
Decimal: 27
32 n
Hex: 1B 20 n
Description:
Set the right-side spacing of the character to n*(horizontal or vertical motion unit) n=0
～
255.
Horizontal or vertical motion unit is specified by GS P command
ESC
！
Set print mode
Format: ASCII: ESC ！ n
Decimal: 27 33 n
Hex: 1B 21 n
Description:
Select the print mode using n as follows. n=0
～
255
ESC $ Set absolute print position
Format: ASCII: ESC $ nL nH
Decimal: 27 36 nL nH
Hex: 1B 24 nL nH
Description:
Set the distance from the beginning of the line to the position at which subsequent characters are to be
Bit Value Function
0 Character A 0
1 Character B
1, 2 -- -- -- Not define
0 Emphasize mode not selected 3
1 Emphasize mode selected
0 Double-height not selected 4
1 Double-height selected
0 Double-width not selected 5
1 Double-height selected
6 -- -- -- Not define
0 Underline mode not selected 7
1 Underline mode selected