Jolimark TP820, Руководство пользователя

Страница: 11 / 48

TP820 User’s Manual
- 8 -
click “Next”, choose “Yes-(recommended)”, click “Finish”. Come out a window of “Printer test
page completed”, click “Yes”.
6. The printer driver process is installed successfully.
（
2
）
The installing steps with an USB cable:
Note: 1. As the system of Windows 98/ME doesn’t have integrated USB driver control,
please install USB driver before using USB interface printing. Then install USB
printer driver.
2. If it has installed the USB driver, please install the USB printer driver directly as
the following steps.
USB driver installing steps:
1. Connect an USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, come out a window of “Add New
Hardware Wizard”, click “Next”.
3. Come out a window of “Add New Hardware Wizard”-“Windows operation”, choose “Search the
best driver for the device (recommended)”, click “Next”.
4. Come out a window of “Search for new drivers”, check “Specify a location”, click “Browse”, select
the path as follows: CD-ROM-“Driver”-“
【
WIN98 (WINME) \USBdriver
】
”, then click “OK”.
5. Return to a window of “Search for new drivers”, click “Next”; Come out a window of “Windows
driver file search for the device”, click “Next”.
6. After the system finishing installing the file automatically, come out a window of “USB Print
Supported”, click “Finish”.
7. The printer USB driver process is installed successfully.
USB printer driver installing steps:
1. Click “Start” → “Settings” → “Printers”.
2. Click “Add Printer”, then it will show a window of “Add Printer Wizard”, click “Next”.
3. Come out a window of “Click the manufacturer and model of your printer”, click “Have Disk...”,
please click “Browse”, select the path as follow: CD-ROM-“Driver”-“WIN98 (WINME)”, where you
can find a file named: TP820.inf “Open”, and then click “OK”.
4. Come out a window of “Install From Disk”, click “OK”, return to a window of “Add Printer", then click
"Next".
5. Come out a window of “Printer port”, select “Available ports”, select “JMUSB”, click “Next”, and
then show the printer’s name. If the system is not installed by other printer driver process, the
printer is treated as default printer by the application process of Window98 environment, click
“Next”. Otherwise according to prompt, choose the printer is default: “Yes”, click “Next” choose
“Yes-(recommended)”, click “Finish”. Come out a window of “Printer test page completed”, click
“Yes”.
6. The printer driver process is installed successfully.
Please setup the driver following the setup description in the CD going along with the printer. What’s
more, you can use the TM-T88II, TM-T88III serials driver from EPSON.
If you want to cut the paper after printing, please select the “Full cut” or “Partial cut” in the
Paper/Quality page after clicking the “Printing Preferences” button, which lies in the “General” page
of the driver properties. Referring figure is shown below.
It is noted that if paper cut effect is the same whichever you select “full cut” or “partial cut” in the
driver properties, which means that the cutter (the printer equipped with) can only carry out one kind
of cut-methods.