Jolimark TP820, Руководство пользователя

Страница: 41 / 48

TP820 User’s Manual
- 38 -
FS 2 Define user-define Chinese characters
Format: ASCII: FS 2 c1 c2 d1……d72
Decimal: 28 50 c1 c2 d1……d72
Hex: 1C 32 c1 c2 d1……d72
Description:
c1=fe; a1<=c2<=fe; 0<=d<=255; c1 specified the first byte of the character code, c2 specified the second
byte of the character code. Data dk defined from up to down 3 bytes one column, and from left to right 24
columns.
FS S
Set Chinese character spacing
Format: ASCII: FS S n1 n2
Decimal: 28 83 n1 n2
Hex: 1C 53 n1 n2
Description:
0
≤
n1
≤ 255, 0 ≤
n2
≤ 255 Set the character left-side spacing to n1*(horizontal or vertical motion unit),
right-side spacing to n2*(horizontal or vertical motion unit).
Horizontal or vertical motion unit is specified by GS P command.
FS W Turn quadruple-size mode on/off for Chinese character
Format: ASCII: FS W n
Decimal: 28 87 n
Hex: 1C 57 n
Description:
0
≤
n
≤ 255
When the LSB of n is 0, turn off the quadruple-size mode.
When the LSB of n is 1, turn on the quadruple-size mode.
FS p n m Print NV bit image
Format: ASCII: FS p
n m
Decimal: 28 112 n m
Hex: 1C 70 n m
Description:
1
≤
n
≤ 64 m=0, 1, 2, 3, 48, 49, 50, 51
Prints the NV bit image n using the mode specified by m.
m = 0, 48 Normal mode; m = 1, 49 Double width mode;
m = 2, 50 Double height mode; m = 3, 51 Quadruple mode.
FS q n Define the NV bit image
Format: ASCII: FS q n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Decimal: 28 113 n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Hex: 1C 71 n [xL xH yL yH d1 d2 …dk]1…[xL xH yL yH d1 d2 …dk]
Description:
1
≤
n
≤ 64; xH= 0; 0<=xL<=72; yH=0; 0<=yL<=30
k= (xL+xH*256)*(yL+yH*256)*8
The command can define 64 bit images at the same time. All NV images preciously defined are canceled
when new bit image defined. When this command processing, ERROR indicator will be on for a period
time, then the PAPER OUT indicator and ERROR indicator will be both on and the printer resets. No
more other data or commands followed this command, or may cause data lost or printing mess. The NV
image data will be stored in the printer even which is powered off, and will not lose till this command
reprocessed. Excessive use of this function may cause the NV memory damaged. As a guideline, the
command should not be processed more than 10 times per day.
The hole command including the bit image data should less than 128K bytes (1M bits).
xL,xL specifies (xL+xH*256) bytes in the horizontal direction for the NV bit image you defined.
yL,yH specifies (yL+yH*256) bytes in the vertical direction for the NV bit image you defined.
d specifies the definition data for the NV bit image(column format).