background image

TFP185

Page 6 of 6

NATIONAL FIRE PROTECTION ASSOCIATION and NFPA are registered trademarks of National Fire Protection Association;

TEFLON is a registered trademark of DuPont; SHERWIN-WILLIAMS is a registered trademark of SWIMC LLC

1400 Pennbrook Parkway, Lansdale, PA 19446 | Tel1-215-362-0700

© 2020 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision date and are subject to change without notice.

Limited 

Warranty

For warranty terms and conditions, visit 

www.tyco-fire.com.

Ordering 

Procedure

Contact your local distributor for avail-

ability. When placing an order, indicate 

the full product name and Part Number 

(P/N).

Sprinkler 

Assembly

Specify: Model RFII, 5.6 K-factor, Hori-

zontal Sidewall, Flat Plate Concealed 

Sprinkler, Standard Coverage, Quick 

Response, (specify) temperature rating, 

P/N (specify):

160°F (71°C) . . . . . . . . . . . . . . . . . . 50-550-1-165

212°F (100°C) . . . . . . . . . . . . . . . . . 50-550-1-212

Note:

 Sprinkler and Cover Plates are 

separately ordered. See below for 

Cover Plate ordering information.

Separately Ordered 

Cover Plate 

Assembly

Specify: LFII/RFIII Concealed Sprin-

kler Cover Plate Assembly, tempera-

ture rating (specify), (specify) finish, 

P/N (specify):

139°F (59°C)

Ivory (RAL1015)  . . . . . . . . . . . . . . .56-204-0-135

Beige (RAL1001)  . . . . . . . . . . . . . . 56-204-2-135

Pure White (RAL9010)*  . . . . . . . . . 56-204-3-135

Signal White (RAL9003)**  . . . . . . . 56-204-4-135

Grey White (RAL9002) . . . . . . . . . . 56-204-5-135

Brown (RAL8028). . . . . . . . . . . . . .56-204-6-135

Black (RAL9005)  . . . . . . . . . . . . . . 56-204-7-135

Brushed Brass . . . . . . . . . . . . . . . . 56-204-8-135

Brushed Chrome  . . . . . . . . . . . . . . 56-204-9-135

Custom Paint . . . . . . . . . . . . . . . . . 56-204-X-135

165°F (74°C)

Ivory (RAL1015)  . . . . . . . . . . . . . . .56-204-0-165

Bright Chrome  . . . . . . . . . . . . . . . . 56-204-1 165

Beige (RAL1001)  . . . . . . . . . . . . . . 56-204-2-165

Pure White (RAL9010)*  . . . . . . . . . 56-204-3-165

Signal White (RAL9003)**  . . . . . . .56-204-4-165

Grey White (RAL9002) . . . . . . . . . .56-204-5-165

Brown (RAL8028). . . . . . . . . . . . . .56-204-6-165

Black (RAL9005)  . . . . . . . . . . . . . . 56-204-7-165

Brushed Brass . . . . . . . . . . . . . . . .56-204-8-165

Brushed Chrome  . . . . . . . . . . . . . .56-204-9-165

Custom Paint . . . . . . . . . . . . . . . . . 56-204-X-165

* Eastern Hemisphere sales only 
** Previously known as Bright White

Note:

 All Custom Cover Plates are 

painted using SHERWIN-WILLIAMS 

Interior Latex Paint. Contact Johnson 

Controls Customer Service with any 

questions related to custom orders.

Sprinkler Wrench

Specify: W-Type 37 Sprinkler Wrench, 

P/N 56-320-1-015

Pipe Guide Bracket

Pipe Guide Bracket accessory for 

sprinkler installation adjacent to 

framing member such as 2 x 4 within 

wall structure, includes mounting 

screws.

Note:

 The pipe guide bracket is 

required for CPVC installations only.

Specify: Pipe Guide Bracket, P/N 

91-520-115

Содержание tyco RFII







Отзывы: