![Johnson Controls TL-MAP1810- OPM Скачать руководство пользователя страница 6](http://html1.mh-extra.com/html/johnson-controls/tl-map1810-opm/tl-map1810-opm_installation-manual_2024165006.webp)
North American Emissions Compliance
United States
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when this equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area may cause harmful
interference, in which case the users will be required to correct the interference at their own
expense.
RF Transmitters: Compliance Statement (Part 15.19)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
RF Exposure (OET Bulletin 65)
To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter
should only be used or installed at locations where there is at least 20 cm separation distance
between the antenna and all persons.
Canada
Industry Canada Statement
The term
IC
before the certification/registration number only signifies that the Industry Canada
technical specifications were met.
Le terme « IC » précédant le numéro d'accréditation/inscription signifie simplement que le produit
est conforme aux spécifications techniques d'Industry Canada.
Installation
Observe the following guidelines:
• Verify that all parts shipped with the MAP Gateway.
• Keep the unit encased in the protective shell. If not protected by the enclosure in which it
ships, the MAP Gateway may be subject to physical damage.
Parts Included (Portable Model)
• MAP Gateway
Mobile Access Portal Gateway Installation Guide
6