Johnson Controls MS-NCM4510-2 Скачать руководство пользователя страница 11

Страница: 11 / 11

Table 9: NCM45x0-2 Model

1.2 kg (2.7 lb)

Shipping Weight

United States:

Underwriters Laboratories Inc. (UL)

Listed (PAZX), UL 916, FCC

compliant, CFR47, Part 15, Class B

Canada:

UL Listed (PAZX7), CAN/CSA C22.2 No. 205, Industry Canada compliant

Europe:

CE Mark - Johnson Controls, Inc., declares that this product is in compliance

with the essential requirements and other relevant provisions of the EMC Directive
2004/108/EC.

Australia/New Zealand:

C-Tick mark compliant

Compliance

The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond
the specifications, consult the local

Johnson Controls

office. Johnson Controls, Inc. shall not be liable for damages resulting

from misapplication or misuse of its products.

Building Efficiency

507 E. Michigan Street, Milwaukee, WI 53202

Metasys

and Johnson Controls

are registered trademarks of Johnson Controls, Inc.

All other marks herein are the marks of their respective owners.

2013 Johnson Controls, Inc.

www.johnsoncontrols.com

Published in U.S.A.

NCM45x0-2 Series Network Control Module Installation Instructions

Содержание MS-NCM4510-2












Результаты поиска

Содержание MS-NCM4510-2

Отзывы:

Похожие инструкции для MS-NCM4510-2

Бренды по названию

Популярные бренды

Johnson Controls MS-NCM4510-2, Руководство по установке

Результаты поиска

Содержание MS-NCM4510-2

Отзывы:

Похожие инструкции для MS-NCM4510-2

Бренды по названию

Популярные бренды