Table 8: NCM45x0-2 Accessories Ordering Information
Description
Product Code Number
Replacement data protection battery: Rechargeable NiMH 3.6 VDC, 500 mAh
battery with a typical life of 5 to 7 years at 21°C (70°F) (Higher operating
temperatures reduce battery life.)
MS-BAT1020-0
Power transformer family (Class 2, 24 VAC, 40 VA maximum output), no
enclosure
Y65T31-0
Power transformer (Class 2, 24 VAC, 50 VA maximum output), no enclosure
AS-XFR050-0
NCM4500 NT Cable Kit (North American version)
MS-NC45NTK-0
NCM4500 NT Cable Kit (International version). Power adapter has removable
plug that can use one of the several different power plugs included in the kit.
MS-NC45NTE-0
Technical Specifications
Table 9: NCM45x0-2 Model
Dedicated nominal 24 VAC, Class 2 power supply (North America),
SELV
power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)
Power Requirement
25 VAC maximum
Power Consumption
0 to 50°C (32 to 122°F)
Ambient Operating Temperature
10 to 90% RH, 30°C (86°F) maximum dew point
Ambient Operating Conditions
-40 to 70°C (-40 to 158°F)
Ambient Storage Temperature
5 to 95% RH, 30°C (86°F) maximum dew point
Ambient Storage Conditions
Supports data protection on power failure. Rechargeable NiMH battery: 3.6 VDC 500
mAh, with a typical life of 5 to 7 years at 21°C (70°F); Product Code Number:
MS-BAT1020-0
Data Protection Battery
192 MHz
Renesas®
SH4 7760 RISC processor
Processor
128 MB Flash nonvolatile memory
128 MB
Synchronous Dynamic Random Access Memory (SDRAM)
Note:
Even though the unit has 128 MB of memory, it is sized to emulate the capacity
of an NCM300 Series controller with 10 MB of memory.
Memory
Microsoft® Windows®
CE embedded
Operating System
One Ethernet port; 10/100 Mb/s; 8-pin RJ-45 connector
One optically isolated RS-485 port; 9600 bps; pluggable and keyed 4-position terminal
block (
FC
Bus available on NCM4510-2 model only)
One
L
ON
W
ORKS
port; FTT10 78 Kbps; pluggable, keyed 3-position terminal block
(L
ON
W
ORKS
port available on NCM4520-2 model only)
Two RS232C serial ports with standard 9-pin sub-D connectors that support standard
baud rates.
One USB serial port with standard USB connector (not used)
Network and Serial Interfaces
131 x 270 x 62 mm (5.2 x 10.6 x 2.5 in.)
Minimum space for mounting: 210 x 350 x 110 mm (8.3 x 13.8 x 4.3 in.)
Dimensions (Height x Width x Depth)
Plastic housing material: ABS + polycarbonate; Protection: IP20 (IEC60529)
Housing
On flat surface with screws on three mounting clips or a single 35 mm DIN rail
Mounting
10
NCM45x0-2 Series Network Control Module Installation Instructions
