Johnson Controls KT-IP, Руководство по установке, Страница: 9 / 36

5
DN1670-2201
IP Link Installation Manual
Cover Description
The IP Link has a red status LED called Heartbeat Patterns with cover, or STAT without cover. The main
purpose is to indicate if EntraPass is present and if the polling occurs. Table 2 describes the various
heartbeat patterns that are used. See Table 3 for the description of the other status LEDs.
Table 2: Status LED Heartbeat Patterns
Pulses Description Patterns
Steady ON for 15
seconds
IP Link is booting.
1 quick flash a
second
IP Link is configured and communicating with the
Gateway.
1 long flash a
second
IP Link is in Factory Default (DHCP) mode
3 flashes in 3
seconds and OFF
for 1 second
IP Link is in Forced Static IP mode (192.168.1.2)
and in Factory Default .
2 quick flashes a
second
IP Link is no longer communicating with the
Gateway but is configured.
5 quick flashes a
second
IP Link is preparing to restart.
1 long pulse for 2.5
seconds
IP Link has received a broadcast from the Gateway
or the KT-Finder. After this delay, the IP Link returns
to its previous heartbeat pattern. Useful to verify
network communication.