Johnson Controls KT-IP, Руководство по установке, Страница: 14 / 36

DN1670-2201 10
Reserved DHCP IP Addressing
Use this type of addressing in an environment where the customer DHCP server assigns the IP
address automatically to the IP Link. Since the EntraPass application is at the host site, you must use
the KT-Finder to configure the IP Link.
Pre-Installation
It is important at this stage to contact the Network Administrator where the IP Link is installed so that
you can complete the
Network Configuration Information Sheet
. We suggest that you always have the
Network Configuration Information Sheet close by, and keep a copy with your IP Link.
Confirm that all parts are in order, all necessary tools are available, and that the site is properly
prepared.
If you are connecting your IP Link to EntraPass, you must make sure that you are running EntraPass
v4.00 or higher.
Network
Configuration
• Network Configuration Information Sheet is fully completed
Equipment
Checklist
• IP Link
• RS-232 cabling
• Installation Manual
• VC-485 (recommended)
• Network cable
• Network crossover cable for direct connection from PC to IP Link
ESD
Precautions
ElectroStatic Discharge (ESD) may damage electrostatic sensitive devices. Use antistatic protection to
avoid the risk of equipment damage.
Reading
Checklist
We strongly suggest that you keep the corresponding EntraPass reference manual close at hand: